BTC Model

Conventional type cyclones are used in industrial facilities to separate the large dust particles from the air and to reduce the dust particle load coming to the collection filters. Cyclones can hold all large dust particles up to 50μ, but not those below 10μ.

Multicyclones are used in industrial facilities to separate dust-laden waste gases such as flue gases and large dust particles from the air. Dust holding efficiencies are higher than those in conventional cyclones and the particle sizes that can be held are much thinner and smaller.

The dusty gas entering the cyclone tangentially at high speed from the cyclone inlet is given a helical flow form, allowing the particles with higher density than the carrier medium to be directed to the cyclone walls by centrifugal force. Particles that lose their inertia due to the sudden speed change in the cyclone filter through the cyclone wall and flow into the high-angle conical storage bunker at the bottom. As a result, the gas, which has been purified from the dust it contains, is discharged out from the upper part of the cyclone through the outlet pipe in the center of the cyclone.

• High efficiency dust particle retention feature.
• Pre-storage advantage in the bunker.
• Custom designs for any capacity and gas is possible.
• Low operating and maintenance cost.